Hawk 9 - T6-101 Impregnated Core Drill Bit - Set to Liner

Conventional coring is a traditional method of taking samples from bottom-hole formations. This method is still the most commonly practiced method in the petroleum industry. The selection of conventional core bits Drill It provides are of the highest quality alloyed steel which allow for high penetration rate and a longer life for the bit. 

The T6-101 is built for a T6 Core barrel. The T6 core barrel is also a double tube core barrel with the inner tube mounted on bearings. It has a sturdier design making it more adapted for working in all types of terrains. The diameter is 101mm or 4 Inches wide and produces an inner core of 79mm (3.1 Inches) in dimeter.

This bit is part of the Hawk 9 Series. The Hawk 9 bits are designed with the diamond grade very exposed from the bit matrix, making them best suitable to tackle Medium Hard and some Hard soft rock formations such as Soft Sandstone, Sandy Shale, Claystone, Limestone and Hard Shales. 

Our Hawk range of coring drill bits are Set To Liner models, meaning the casing string that does not extend to the top of the wellbore, but instead is anchored or suspended from inside the bottom of the previous casing string. There is no difference between the casing joints themselves.